A Good Pilot is Always Learning

PTS CFI CFII (2) (2)

A collection of free downloads to help you prepare for your pilot licenses.

Issue link: http://nerdybethtx.uberflip.com/i/1092082

Contents of this Issue

Navigation

Page 126 of 245

117 FAA-S-8081-6D 1. Primary and secondary flight controls 2. Trim 3. Water rudders (AMES) 4. Powerplant and propeller 5. Landing gear 6. Fuel, oil, and hydraulic 7. Electrical 8. Avionics including autopilot 9. Pitot static, vacuum/pressure and associated instruments 10. Environmental 11. Deicing and anti-icing Task D: Performance and Limitations References: FAA-H-8083-3, FAA-H-8083-23, FAA-H-8083-25, FAA-S-8081-12, FAA-S-ACS-6; AC 61-84; POH/AFM. Objective: To determine that the applicant exhibits instructional knowledge of the elements related to performance and limitations by describing: 1. Determination of weight and balance condition. 2. Use of performance charts, tables, and other data in determining performance in various phases of flight. 3. Effects of exceeding airplane limitations. 4. Effects of atmospheric conditions on performance. 5. Factors to be considered in determining that the required performance is within the airplane's capabilities. Task E: Airworthiness Requirements References: 14 CFR parts 39, 43; FAA-S-8081-12, FAA-S-ACS-6; POH/AFM. Objective: To determine that the applicant exhibits instructional knowledge of the elements related to required airworthiness by explaining: 1. Required instruments and equipment for day/night VFR. 2. Procedures and limitations for determining airworthiness of the airplane with inoperative instruments and equipment without a minimum equipment list (MEL). 3. Requirements and procedures for obtaining a special flight permit. 4. Airworthiness directives, compliance records, maintenance/ inspection requirements, and appropriate records. 5. Procedures for deferring maintenance on aircraft without an approved MEL.

Articles in this issue

Archives of this issue

view archives of A Good Pilot is Always Learning - PTS CFI CFII (2) (2)